Good Earth Lighting
Good Earth Lighting, Inc.
SCONCES & BATH BARS
GARAGE / WORKSHOP
How To Buy
-- Select --
Sconces & Bath Bars
How To Buy
Email a friend
Ratio of a lamp's light output on ballast compared to the lamp's rated light output. The higher the ballast factor, the more light delivered.
Circle E Ballast
Indicates special EPACT compliant version of ballast. Check the laws and codes for specific applications.
Color Rendering Index
CRI-indicates how true to color lighted objects appear. A higher number means truer color. The CRI creates light sources on a scale of 0 to 100. The higher the CRI the more vibrant or close to natural the colors the objects appear.
Color Temperature or Chromaticity
The appearance of the light that comes from a light source. The color temperature is measured in Kelvin or "k". The higher the color temperature, the visually cooler or bluer the light appears.
A ballast that utilizes electronic components to transform current at high frequency to operate fluorescent or discharge lamps.
The measurement of the ammount of light reaching the surface. Footcandles are measured in lumens per square foot.
Different lamp types have different abilities to convert electrical power (watts) into visible light (lumens). The quality of light emitted is divided by the imput power to determine the lamps efficacy. This is expressed as lumens per watt LPW.
How long on average a bulb is estimated to last.The number of burning hours on average after which 50% of representative groups of lamps in tests under controlled burning conditions and at a specified number of burning hours per start have failed.
Lumens per watt a measure of energy efficiency. Fluorescent lamps are very energy efficient and emit up to 100 lumens per watt.
Bulb brightness. A higher number means brighter light. Fluorescent lamp lumens decrease over its life.
A ballast that uses core and coil assembly to transform electrical current to start and operate fluorescent lamps.
A ballast designed to operate 1" diameter, T8 fluorescent R.S. lamps. It is not compatable with T12 or preheat lamps.
The ratio of power(watts) to volt-amps of the ballast. The power factor ratio may be used to determine how efficiently total input power is being used.
©2013 Good Earth Lighting, Inc.
5260 Capitol Drive Wheeling, IL 60090